|
Description
The Model 750C is specifically designed for slurry and highly viscous applications where clogging of the sensor area is common. The Model 750C uses a 3.5” flush diaphragm to prevent unwanted clogging of the sensing area. This submersible level device is made of 316SS which offers outstanding environmental protection and is available in depths up to 138 feet of water.
The non-fouling flush diaphragm and cage assembly are designed to eliminate unwanted buildup of debris, fats, oils, greases, and other bio-solids by eliminating any potential gaps on the measurement area. The high integrity seal’s heavy construction eliminates the effects of turbulence on the sensor.
The 750C Series Transmitters indicate the level of liquid by continuously measuring hydrostatic pressure via its sensing element, an ion implanted silicon semiconductor chip with integral Wheatstone Bridge circuit. Once the sensor measures the pressure, the data is transmitted by a 4 to 20 mA output signal. This design provides for excellent reliability in remote and inaccessible locations.
The Model 750C is approved for intrinsically safe operation in hazardous locations as designated by Class I, Div 1, Groups A, B, C & D and Class II, Groups E, F & G. when used with an approved barrier.
All Model 750C transmitters are equipped with a sealed cable termination area and moisture absorbing desiccant. The purpose is to restrict moisture from entering the transmitter through the cable vent.
Features
• Oversized 3.5” flush diaphragm to prevent clogging
• 0.25% Full Scale Accuracy
• Intrinsically Safe for Class 1 Division 1
• Custom Pressure Ranges & Cable Lengths
• Extremely rugged 316L SS construction
• Two-wire, 4-20 mA standard output
• Reverse polarity and surge protection
Applications
• Lift Stations
• Sewage Levels
• Slurries
• Storm Runoffs
• Pump Control
|
